Perform Engine Maintenance - Deutz Models; Replace The Hydraulic Tank Breather Cap - Models With Optional Hydraulic Oil; Perform Engine Maintenance - Ford Models - Genie GS-3384 Service Manual

January 2013
C-5
Perform Engine Maintenance -
Deutz Models
Engine specifications require that this procedure be
performed every 500 hours or semi-annually,
whichever comes first.
Required maintenance procedures and additional
engine information is available in the
Deutz 2011 Operation Manual
(Deutz part number 0297 9929).
Deutz 2011 Operation Manual
Genie part number
C-6
Replace the Hydraulic Tank
Breather Cap - Models with
Optional Hydraulic Oil
Genie specifications require that this procedure be
performed every 500 hours or semi-annually,
whichever comes first.
The hydraulic tank is a vented-type tank. The
breather cap has an internal air filter that can
become clogged or, over time, can deteriorate. If
the breather cap is faulty or improperly installed,
impurities can enter the hydraulic system which
may cause component damage. Extremely dirty
conditions may require that the cap be inspected
more often.
1 Remove and discard the hydraulic tank breather
cap.
2 Install and new cap onto the tank.
Part No. 84793
Section 3 • Scheduled Maintenance Procedures
C-7
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure be
performed every 800 hours or semi-annually,
whichever comes first.
Required maintenance procedures and additional
engine information is available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302) OR the
Ford DSG-423 EFI Operator Handbook
(EDI part number 1060020).
84794
Ford LRG-425 EFI Operator Handbook
Genie part number
Ford DSG-423 EFI Operator Handbook
Genie part number
GS-84 • GS-90
CHECKLIST C PROCEDURES
84792
119488
3 - 33