Replace The Drive Hub Oil; Perform Engine Maintenance - Ford Models - Genie GS-3384 Service Manual

January 2013
A-11

Replace the Drive Hub Oil

Drive hub specifications require that this one-time
procedure be performed after the first 150 hours of
usage. After this interval, refer to the maintenance
checklists for continued scheduled maintenance.
Replacing the drive hub oil is essential for good
machine performance and service life. Failure to
replace the drive hub oil at yearly intervals may
cause the machine to perform poorly and continued
use may cause component damage. See D-3,
Replace the Drive Hub Oil.
Part No. 84793
Section 3 • Scheduled Maintenance Procedures
A-12
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure be
performed every 200 hours or quarterly, whichever
comes first.
Required maintenance procedures and additional
engine information is available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302) OR the
Ford DSG-423 EFI Operator Handbook
(EDI part number 1060020).
Ford LRG-425 EFI Operator Handbook
Genie part number
Ford DSG-423 EFI Operator Handbook
Genie part number
GS-84 • GS-90
CHECKLIST A PROCEDURES
84792
119488
3 - 13