Function Manifold Components - Models Without Outriggers - Genie GS-3384 Service Manual

Section 4 • Repair Procedures
MANIFOLDS
7-2

Function Manifold Components - Models without Outriggers

The function manifold is located in the chassis tray on the ground controls side of the machine.
Index
No. Description
1 Check valve,
5 psi / 0.3 bar .................................... AA .......... Platform down circuit .................................. 20 ft-lbs / 27 Nm
2 Diagnostic nipple .............................. AB .......... Testing
3 Relief valve, 3500 psi / 241.3 bar .... AC .......... System relief ............................................... 20 ft-lbs / 27 Nm
4 Proportional solenoid valve ............. AD .......... All functions ................................................. 35 ft-lbs / 47 Nm
5 Relief valve, 2000 psi / 138 bar ........ AE .......... Steer circuit ................................................. 25 ft-lbs / 34 Nm
6 Diagnostic nipple .............................. AF .......... Testing
7 DO3 valve, 3 position 4 way ............ AG .......... Platform up/down ................................. 30-35 in-lbs / 3-4 Nm
8 Solenoid valve, 3 position 4 way ..... AH .......... Steer left/right .............................................. 25 ft-lbs / 34 Nm
9 Orifice - Plug, 0.150 inch / 3.8 mm ... AI ........... Platform down circuit
10 Flow regulator,
0.1 gpm / 0.38 L/min ......................... AJ .......... Bleeds off proportional
4 - 74
Schematic
Item Function
valve to tank ................................................ 20 ft-lbs / 27 Nm
GS-84 • GS-90
January 2013
Torque
Part No. 84793