Rear-Wheel Stand - BMW R 1250RS Rider's Manual

9
156
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
z
with center stand
ATTENTION
Lifting-off of the center stand
if the vehicle is raised too
high
Component damage cause by
tipping over
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Adjust the height of the front
wheel stand if necessary.
Ensure that motorcycle is
standing securely.

Rear-wheel stand

Mounting rear-wheel
stands
Park motorcycle, ensuring that
support surface is firm and
level.
Use basic stand with rear
wheel adapter. The basic
OE
stand and its accessories
are available through your
authorized BMW Motorrad
retailer.
Set desired height of rear-
wheel stand using bolts 1.
Remove the lock washer 2; to
do so, press the unlock but-
ton 3.