BMW R 1250RS Rider's Manual page 52

Side stand monitoring
3
faulty
Side stand monitor-
50
ing faulty. Onward
journey possible. Stop
engine when stationary!
Have checked by workshop.
Possible cause:
The side-stand switch or its
wiring is damaged.
z
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS indicator and warning
light flashes.
Possible cause:
ABS self-diagnosis rou-
tine not completed
ABS is not available, as the
self-diagnosis routine was not
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel speed sensors: 3 mph
(5 km/h))
Ride off slowly. Please note
that the ABS function is only
available after the self-diagno-
sis has completed.
ABS deactivated
ABS indicator and warning
light lights up.
Off!
ABS deactivated.
Possible cause:
The ABS system was deacti-
vated by the rider.
Switch on ABS function
( 68).
ABS fault
ABS indicator and warning
light lights up.
Limited ABS avail-
ability! Onward jour-
ney possible. Ride care-
fully to next specialist
workshop.
Possible cause:
The ABS control unit has
detected an error. The
partial integral brake and the
Dynamic Brake Control function
have failed. The ABS function is
limited.
It remains possible to continue
riding. Take note of additional