Jump-Starting - BMW R 1250RS Rider's Manual

9
176
Insert inside end of lens into
light housing and close it.
z
Install screw 1.
Replacing LED tail light
The LED tail light can only be
completely replaced.
For details please contact
a specialist service facility,
preferably an authorized
BMW Motorrad Dealer.
Replace LED headlights
LED headlights can only be re-
placed as a complete unit. For
details please contact a spe-
cialist service facility, preferably
an authorized BMW Motorrad
Retailer.
Replace additional LED
headlight
with LED additional
headlight OA
The LED additional headlights
can only be completely replaced;
it is not possible to replace indi-
vidual LEDs.
Please contact a specialist
service facility, preferably an
authorized BMW Motorrad
retailer.

Jump-starting

ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the mo-
torcycle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.