Traction Control; Dtc); Traction Control (Asc/Dtc) - BMW R 1250RS Rider's Manual

Release button 1 after
changeover of the ABS system
status.
ABS indicator and warning
light remains off or contin-
ues to flash.
ASC⁄DTC system status remains
unchanged and new ABS system
status ON is displayed for a short
time.
The ABS function is switched
on.
As an alternative, the ignition
can also be turned off and then
on again.
If the ABS indicator and
warning light lights up
after switching the ignition off
and on and then continuing
driving above the minimum
speed, an ABS fault has oc-
curred.
min 6 mph (min 10 km/h)
Traction control (ASC/

DTC)

Switching the ASC/DTC
function off
Switching on ignition (
NOTICE
The ASC/DTC function can also
be deactivated while riding.
Press and hold button 1 until
the ASC/DTC indicator and
warning light changes its
display behavior.
Immediately after pressing the
button 1, the ASC/DTC system
status ON and current ABS sys-
tem status are displayed.
ASC/DTC indicator and
58).
warning light lights up.
Possible ASC/DTC system status
OFF! is displayed.
Release button 1 after the
ASC/DTC system status
switches.
The new ASC/DTC system sta-
tus OFF! is displayed for a short
time. The ABS system status re-
mains unchanged.
ASC/DTC indicator and
warning light remains illu-
minated.
The ASC/DTC function is
switched off.
4
69
z