BMW R 1250RS Rider's Manual page 172

9
170
Tighten axle clamping screws 1
to appropriate torque.
z
Clamping screw for
quick-release axle in
telescopic fork
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
14 lb/ft (19 Nm)
Remove front wheel stand.
Slide the brake calipers on the
left-hand and right-had side
onto the brake rotors.
Install holding clip 3 on left and
fit securing screws 2 on left
and right and tighten to appro-
priate torque.
Brake caliper on tele-
scopic forks
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.