BMW R 1250RS Rider's Manual page 54

ASC/DTC self-diagnosis
3
routine not completed
ASC/DTC indicator and
52
warning light flashes slowly.
Possible cause:
ASC/DTC self-diagnosis
routine not completed
The ASC/DTC function is not
available, as the self-diagnosis
z
function has not been
completed. (To check wheel
speed sensors, motorcycle
must reach a minimum speed
with engine running: min
3 mph (min 5 km/h))
Ride off slowly. The ASC/DTC
indicator and warning light
must go out after a few me-
ters.
If the ASC/DTC indicator and
warning light continues flashing:
Contact an authorized work-
shop, preferably an authorized
BMW Motorrad retailer.
ASC/DTC switched off
ASC/DTC indicator and
warning light lights up.
Off!
Traction control de-
activated.
Possible cause:
The ASC/DTC system was deac-
tivated by the rider.
Switching the ASC/DTC func-
tion on ( 70).
Limited ASC/DTC
availability
ASC/DTC indicator and
warning light lights up.
Traction control lim-
ited. Onward journey
possible. Ride carefully
to next specialist work-
shop.
Possible cause:
The ASC/DTC control unit has
detected a fault.
ATTENTION
Damage to components
Damage to sensors, for example,
with the resultant malfunctions
Do not carry along any objects
under the rider's or passen-
ger's seat.
Secure vehicle tools.
Do not damage the rotational
speed sensor.
It must be noted that only lim-
ited ASC/DTC function is avail-
able.
It remains possible to continue
riding. Observe additional in-
formation on situations that
can lead to a ASC/DTC fault
( 142).