BMW R 1250RS Rider's Manual page 126

After a longer standstill of the
7
vehicle, an animation is displayed
during the system start.
124
Phase 2
The general warning light
switches from red to yellow.
Phase 3
All switched on indicator and
z
warning lights are switched off
one after the other in reverse or-
der.
If one of the indicator and warn-
ing lights does not switch on:
WARNING
Defective warning lights
Lack of display of malfunctions
Check the display of all indica-
tor and warning lights.
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis
The self-diagnosis routine checks
whether the BMW Motorrad In-
tegral ABS is ready for operation.
The self-diagnosis routine runs
automatically when you switch on
the ignition.
Phase 1
Check on system components
monitored by the diagnostic
system while motorcycle is
parked.
ABS indicator and warning
light flashes.
Phase 2
Check wheel sensors while
starting off.
ABS indicator and warning
light flashes.
ABS self-diagnosis
completed
The ABS indicator and warning
light goes out.
Check the display of all indica-
tor and warning lights.
ABS self-diagnosis rou-
tine not completed
ABS is not available, as the
self-diagnosis routine was not
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel speed sensors: 3 mph
(5 km/h))
If an ABS error is displayed after
the ABS self-diagnosis is com-
pleted:
It remains possible to continue
riding. Please be aware that
neither the ABS nor the inte-
gral function are available.