BMW R 1250RS Rider's Manual page 74

4
NOTICE
The damping cannot be adjusted
72
while the motorcycle is being
ridden.
z
The selection arrow 4 is dis-
played.
The selection arrow 4 goes
away after the changeover of
the status.
The following settings are avail-
able:
Road: damping for comfortable
road travel
Dynamic: damping for
dynamic road travel
To adjust the spring setting:
Start the engine (
Repeatedly press and hold but-
ton 1 until the desired setting
is displayed.
NOTICE
The spring setting cannot be
changed while the motorcycle
is underway.
The following message is dis-
played if no adjustments are
possible: Load adjust. only
avail. when halted.
The selection arrow 4 is dis-
played.
123).
The selection arrow 4 goes
away after the changeover of
the status.
The following settings are avail-
able:
Min: minimum spring setting
(only suitable for one-up mode)
Auto: automatic spring setting
(recommended chassis and
suspension adjustment)