Control Elements - Siemens SIMOTION P320-4 E Manual

Interfaces

5.3 Control elements

5.3 Control elements
On/Off switch
①
Figure 5-2
De-energize the SIMOTION P320-4!
The On/Off switch does not disconnect the device from the power supply system.
When the switch is in position 0 (Off), the device is still supplied with mains voltage.
To remove power from the device, the power supply plug must be removed.
NOTICE
Close down the operating system first
First close down the operating system before switching off the device with the on/off switch,
otherwise data may get lost.
90
Requirement:
The BIOS setup entry After Power Failure is set to Power on.
The On/Off switch is used to switch the SIMOTION P320-4 on.
SIMOTION P320-4 - operator controls
WARNING
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B