Specific Safety Instructions For The Simotion P320-4; General Safety Instructions For The Simotion P320-4 - Siemens SIMOTION P320-4 E Manual

1.2

Specific safety instructions for the SIMOTION P320-4

1.2.1

General safety instructions for the SIMOTION P320-4

Life-threatening voltages are present with an open control cabinet
When you install the device in a control cabinet, some areas or components in the open
control cabinet may be carrying life-threatening voltages.
If you touch these areas or components, you may be killed by electric shock.
Switch off the power supply to the cabinet before opening it.
System expansions
NOTICE
Damage through system expansions
Device and system expansions may be faulty and can affect the entire machine or plant.
The installation of expansions can damage the device, machine or plant.
Device and system expansions may violate safety rules and regulations regarding radio
interference suppression.
If you install or exchange system expansions and damage your device, the warranty becomes
void.
Note the following for system expansions:
● Only install system expansion devices designed for this device. Contact your technical
support team or where you purchased your PC to find out which system expansion devices
may safely be installed.
● Observe the information on electromagnetic compatibility (Page 155).
NOTICE
"Open Type" UL508
Note that the device is classified as "Open Type" for use in the area of Industrial Control
Equipment (UL508). Installation of the device in an enclosure according to UL508 is
conditional for approval or operation according to UL508.
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B
WARNING
1.2 Specific safety instructions for the SIMOTION P320-4
Safety instructions
17