Siemens SIMOTION P320-4 E Manual page 106

Installation/mounting
6.2 Permissible mounting positions
Mounting the standard mounting rail clip
Before you can install the device on a standard mounting rail, you will need to attach the
standard mounting rail clip included in the scope of delivery.
The fasteners and screws required are supplied with the device for mounting depending on
the order number.
Requirement
● 1 standard mounting rail clip
● 2 screws
● 1 T20 screwdriver
Use the two screws to mount the standard mounting rail clip on the SIMOTION P320-4
enclosure.
Figure 6-1
106
Mounting the standard mounting rail clip
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B