Siemens SIMOTION P320-4 E Manual page 78

Application planning
4.1 Unpacking and checking the delivery
6. If the contents of the packaging are incomplete, damaged or do not match your order, inform
the responsible delivery service immediately.
7. Please keep the enclosed documentation, it belongs to the device. You need the
documentation when you commission the device for the first time.
8. Write down the identification data of the device.
78
WARNING
Electric shock and fire hazard due to damaged device
A damaged device can be under hazardous voltage and trigger a fire in the machine or
plant. A damaged device has unpredictable properties and states.
Death or serious injury could occur.
Make sure that the damaged device is not inadvertently installed and put into operation.
Label the damaged device and keep it locked away. Send off the device for immediate
repair.
NOTICE
Damage from condensation
If the device is subjected to low temperatures or extreme fluctuations in temperature during
transportation, for example in cold weather, moisture could build up on or inside the HMI
device.
Moisture can result in short-circuits in electrical circuits and damage the device.
In order to prevent damage to the device, proceed as follows:
● Store the device in a dry place.
● Bring the device to room temperature before starting it up.
● Do not expose the device to direct heat radiation from a heating device.
● If condensation develops, wait approximately 12 hours or until the device is completely
dry before switching it on.
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B