8.2
Hotplug Enabled BIOS settings
Starting the BIOS setup
Proceed as follows:
1. Reset the SIMOTION P320-4 (warm or cold restart).
Depending on the device version, the default settings may differ from the following figures.
2. After completing the startup test, you can start the program setup with BIOS.
The following message is shown on the display:
Figure 8-1
Press Esc.
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B
SIEMENS Press Esc boot options
Troubleshooting/FAQs
8.2 Hotplug Enabled BIOS settings
127