Installation/Mounting; Installing The Device - Siemens SIMOTION P320-4 E Manual

Installation/mounting

6.1

Installing the device

SIMOTION P320-4 is particularly suitable for installation in consoles, control cabinets and
switchboards.
Perform function test while installing the device in machines or plants
Following the results of a risk analysis, additional protection equipment on the machine or
the system is necessary to avoid endangering persons. With this, especially the programming,
configuration and wiring of the inserted I/O modules have to be executed, in accordance with
the necessary risk analysis identified safety performance (SIL, PL or Cat.). The intended use
of the device has to be secured.
The correct use of the device has to be verified with a function test on the system. This test
can detect programming, configuration and wiring errors. The test results have to be
documented and if necessary inserted into the relevant inputs.
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B
WARNING
6
103