Setting Up A Network Bridge - Mac Bridge Miniport - Siemens SIMOTION P320-4 E Manual

Alternatively to TCP/IP , SIMOTION SCOUT can also communicate locally via PC internal
(local) .
Figure 3-6
3.3.2.1

Setting up a network bridge - MAC bridge miniport

Note
If you are working with SIMOTION P320-4 version V4.5, the Network Bridge is already preset.
The network bridge must be preset, configured via script and set up as described in the
following. Note that the MAC address of the network bridge is different to the MAC address of
the Ethernet adapter.
The following is a step-by-step description of how the network bridge MAC Bridge Miniport is
set up.
Network connections initial situation
Open the Network and Internet via the Control Panel.
● Select Control Panel > All Control Panel Items > Network and Sharing Center > Change
adapter settings.
● Open the Network and Internet > Network Connections dialog box.
The network connections of your PC are shown here.
SIMOTION P320-4 E / P320-4 S
Manual, 03/2018, A5E36004933B
Set PG/PC Interface - PC internal (local) dialog box
Description
3.3 HMI and SIMOTION SCOUT
61