Bellow Seal - Electrolux EWX11831 Service Manual

Take out the hook securing it to the bellow seal.
Take the lamp out of its seat.

16.3.4 Bellow seal

Remove the iron ring securing the bellow seal to the unit.
Release the bellows seal from the front panel.
Take the drum light out of its seat (see related paragraph).
Take the circulation pipe out of its seat in the bellow seal after breaking the
clamp (when reassembling, use a new clamp with the same characteristics
and size 20.5).
Take the seal out of the welded tub (take care as the seal is held in position
by a snap ring).
When reassembling the seal, lubricate with liquid soap the part where the tub
is inserted.
Make sure the references are aligned.
Reassemble the snap ring between the door bellow seal and the tub.
Where featured, reposition the Jet pipe and the lamp in their seats.
Reassemble the iron ring between the door bellow seal and the cabinet.
91/106
Technical Support - DMM 599 77 23-65 Rev. 03