Electrolux EWX11831 Service Manual page 12


Button no. 5: OPTION
This button is related to LED (L2), and performs the option of:
 Extra-rinse
Press this button to enable/disable the option associated with
it and turn the LED on/off respectively, at the same time the
programme time is updated (on the three digit display).

Button no. 6: OPTION
This button is related to LED (L3), and performs the option of:
 Time Save
Press this button to enable/disable the option associated with
it and turn the LED on/off respectively, at the same time the
programme time is updated (on the three digit display).
The following options can also be configured on the appliances:
 Time Save: with two 2 levels, corresponding to: Daily and Super Quick. Press once for the Daily function, the
relevant LED lights up, press twice for the Super Quick function, the relevant LED will remain on fixed and at
the same time the three digit display will vary the cycle time.
 Stains and HOT and COLD Water are alternative options for the same button.
 When the hot water solenoid is present, the relevant option is also configured.

Button no. 7: DELAYED START
This button is configurable and has the DELAYED START
function. During the programme selection phase, a delayed start
can be selected, from 30' to 20 hours (30'
  
3h...
20h 0h) and the time is shown on the display;
during the final hour the time shown decreases minute by minute.
To cancel the delayed start time after the cycle has been started,
set the washing machine to pause using the START/PAUSE
button and cancel the option.

Button no. 8: START/PAUSE
This button is used to START the appliance or to PAUSE it.
It is related to LED L4 which flashes when the appliance is in
pause, whereas it produces a fixed light when the appliance
is performing a washing cycle.
Technical Support - DMM
  
60' 90' 2h
12/106
599 77 23-65 Rev. 03