Accessing The Rear Part - Electrolux EWX11831 Service Manual

Uimc / emc14 inverter. series 7/8/9.
Hide thumbs Also See for EWX11831:
Table of Contents

Advertisement

16.5 Accessing the rear part

16.5.1 Back panel
Loosen the screws that fix it to the cabinet.
16.6 From the back panel, you can access
1. Belt
2. Plastic pulley
3. Inverter
4. Motor
5. Heating
6. Water control
7. Rear shock absorber
8. Welded tub assembly
9. Drain pipe/cabling support
10. Main drain pipe
16.6.1 Belt
Remove the back panel (see relevant chapter).
Hold the belt, and by turning the pulley, remove it.
When reassembling:
Position the belt and align it with the centre of the pulley ( 273 mm)
as shown in the figure.
Turning the pulley, check that the belt positions itself and remains in the
central part of the pulley.
If necessary, adjust the position of the belt on the drive pulley, so that it is
correctly positioned.
Technical Support - DMM
101/106
10
8
2
1
9
5
7
6
4
3
599 77 23-65 Rev. 03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewx14931

Table of Contents