Electrolux EWX11831 Service Manual page 13

Uimc / emc14 inverter. series 7/8/9.
Hide thumbs Also See for EWX11831:
Table of Contents

Advertisement

LCD
The information described below also appears on the LCD:
Programme phases:
The three icons shown have the following meanings, respectively:
 Wash/Prewash/Steam
 Rinse
 Spin
They are lit during the setting phase to display which phases are
included in the programme.
During the programme the icon for the phase in progress flashes,
and when the phase has ended it remains lit continuously. The
same applies when the machine is in pause during the cycle.
The Wash/Prewash/Steam icon also lights up during the steam
phase, in appliances which feature this programme.
Padlock:
The icon lights up when the "child lock" is on.
It indicates that all the buttons are disabled to prevent children from
modifying, starting or pausing the cycle; Press any button or turn the
selector dial during its activation and the icon will flash.
To enable/disable this function, a key combination needs to be
pressed. It may be silk-screen printed on the control panel or
described in the instruction manual.
Door closed sensor:
Lights up when the safety device stops door opening and switches
off when the door can be opened.
Flashes when the device is about to unlock the door.
Washing programme time:
This appears after a washing programme has been selected. This
time corresponds to the time required for the maximum wash load
for each type of programme.
After the programme has started, the time decreases (and is
updated) minute by minute.
Delayed start:
Selected using the related button. After the START/PAUSE button is
pressed, the countdown starts and the delay time decreases hour by
hour, from a delay of 20 hours up to 2 hours ( 30'  60'  90'
 2h  3h...  20 h  0h).
During the last 2 hours, it decreases by 30 mins at a time.
During delayed start, the
Selection incorrect:
Displays the flashing message "Err", for one second.
Appears on selecting option that is incompatible with the programme
selected, or when the selector is turned while a cycle is running.
Technical Support - DMM
icon remains permanently lit.
13/106
599 77 23-65 Rev. 03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewx14931

Table of Contents