Ewx14931 Main Board - Electrolux EWX11831 Service Manual

16.2.2 EWX14931 Main board

To service the main board, use the antistatic kit a code 4055063-95/4.
Remove the worktop (see relevant paragraph).
Remove the power cable from the hooks that hold it close to the board.
Slide off the connector.
Unfasten the two screws securing it to the cabinet.
Remove the clamp that secures the wiring to the spring support bracket.
Using a pair of pliers, remove the clamps that secure the wiring to the power
board assembly container (indicated by the arrows).
Position the board assembly as shown in the figure
Remove the connectors and the faston that connects the earth (beware as it is
fitted with an anti-sliding stop).
80/106
Technical Support - DMM 599 77 23-65 Rev. 03