Remove the four screws which secure the crosspiece to the cabinet.
Remove the screws which secure the crosspiece to the detergent dispenser.
Release the anchor tab which secures the detergent dispenser to the
crosspiece.
Raise both sides of the control panel so as to pull out the hooks which
secure it to the front panel.
Remove the control panel and position it as shown in the figure, making sure
you introduce a protection to prevent scratching it.
16.2.5 Display board/light diffuser/button springs/buttons assembly
Remove the worktop (see relevant paragraph).
Remove the control panel (see relevant paragraph).
Remove the screws and release the hooks which secure the board assembly
to the control panel.
The dial and the dial cover remain fixed to the control panel.
84/106
Technical Support - DMM
599 77 23-65 Rev. 03