Detergent Dispenser; Detergent Dispenser With Multi-Way Solenoid Valves; Operating Principle Of 4-Compartment Conveyor - Electrolux EWX11831 Service Manual

12.2 Detergent dispenser

12.2.1 Detergent dispenser with multi-way solenoid valves

The water in the detergent dispenser is filled through a solenoid valve for cold water (with one inlet, and 2 or
3 outlets) and where featured one for the hot water (with one inlet and one outlet).
The detergent dispenser has 4 compartments.

Tray conveyor

4-way water inlet nozzle

12.2.2 Operating principle of 4-compartment conveyor

Water fill to pre-wash compartment

This solution is used with the four compartment tray: the
detergent in compartment "a" is loaded at the start of the
pre-wash phase.
Water fill to wash compartment

In all models: compartment "b" is used to contain the detergent
loaded at the start of the washing.
Water fill to activating wash compartment

In models with 4-compartment dispenser trays, the filling in
tray "d" is performed by a purpose-provided solenoid valve
during washing, when the water has reached 40°C.

In models with 3-compartment dispenser trays, this section
is not used.
Water fill to conditioner compartment
(pre-wash and wash solenoid valves)

In all models: compartment "c" is used for the conditioner,
which is loaded at the start of the final rinse. The prewash
and wash solenoid valves are activated simultaneously.

In models with a hot water solenoid valve, the hot water solenoid
valve is activated to fill water into the wash compartment.
Technical Support - DMM
(pre-wash solenoid)
(wash solenoid)
Hot water filling
(hot water solenoid)
43/106
599 77 23-65 Rev. 03