Calling Up The Parameter Group - Viessmann VITOTRONIC 200 Service Instructions Manual

Calling up the parameter group

1. Service menu:
Press OK + simultaneously and hold for
å
approx. 4 s.
2. "Coding level 1"
8800 Lock out controls
Value Standard menu
✓
"0"
✓
"1"
∧
"2"
✓
Control enabled
∧
Controls locked
8801 Level enable, time program quieter operation
This parameter is used to specify in which setting level
the time program for quieter operation can be set
("Time prog. noise red.").
8811 User level for display, energy stmt/SPF
This parameter specifies the menu in which the
"Energy statement" can be displayed.
Value Meaning
"0" "Energy statement" is not displayed.
"1" Display under "Diagnosis"
ment" ("Contractor" setting level)
"2" Display under
"Diagnosis"
■
tractor" setting level)
and
Extended menu
■
ergy statement" ("System user" setting
level)
!
Extended menu
✓
∧
∧
"Energy state-
"Energy statement" ("Con-
"Information" "En-
Parameter group Control
3. "Control"
4. Select parameter.
Note
■ Remote control and remote maintenance in conjunc-
tion with Vitocom are possible irrespective of these
settings.
■ Enabling the controls via coding level 1 is also possi-
ble in the blocked condition (settings "1" and "2").
!
Value Meaning
"0" Setting level "System user"
"1" Setting level "Contractor"
"2" Do not adjust. "Time prog. noise red." can
no longer be adjusted.
"3" Do not adjust. "Time prog. noise red." can
no longer be adjusted.
!
Note
Which energy statements are available depends on
the appliance type and the system version.
277