Viessmann Vitotronic 200 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Viessmann Manuals
  4. Boiler
  5. VITOTRONIC 200
  6. Operating instructions manual

Viessmann Vitotronic 200 Operating Instructions Manual

Vitodens 200-w, b2ha models 45 to 150 wall-mounted, gas-fired condensing boiler in conjunction with the vitotronic 300-k mw2c cascade control for operation with natural gas and liquid propane gas heating input 55 to 530 mbh 16 to 150 kw read and s
Hide thumbs Also See for Vitotronic 200:
Table of Contents

Advertisement

Quick Links

See also: Technical Data Manual , Operating Instructions Manual

Operating Instructions

for use by heating contractor
Vitodens 200-W, B2HA
Models 45 to 150
Wall-mounted, gas-fired condensing boiler in conjunction
with the Vitotronic 300-K MW2C cascade control
For operation with natural gas and liquid propane gas
Heating input
55 to 530 MBH
16 to 150 kW
Vitocrossal 300, CU3A
Models 26 to 57
Floor mounted, gas-fired condensing boiler in conjunction
with the Vitotronic 300-K MW2C cascade control
For operation with natural gas and liquid propane gas
Heating input
19 to 199 MBH
5.5 to 58 kW
VITOTRONIC
With HO1B User Interface - Constant temperature control mode
Certified as a component
part for Viessmann boilers
5547 199 - 02 04/2015
200
r
Product may not be exactly as shown
Read and save these instructions
for future reference.
WARNING
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
Do not store or use gasoline or other
fl ammable liquids in the vicinity of this
or any other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliances.
Do not touch any electrical switches,
do not use any phone in your building.
Immediately call your gas supplier
from a neighbor's phone. Follow
the gas supplier's instructions.
If you cannot reach your gas supplier,
call the fi re department.
Installation and service must be
performed by a qualifi ed installer,
service agency or the gas supplier.
WARNING
Improper installation, adjustment, and/
or operation could cause carbon monoxide
poisoning resulting in injury or loss of life.
This product must be installed and serviced
by a professional service technician who is
experienced and qualified in hot water boiler
installation and gas combustion.
IMPORTANT
Please file in Service Binder

Advertisement

Table of Contents
loading

Related Manuals for Viessmann Vitotronic 200

Summary of Contents for Viessmann Vitotronic 200

  • Page 1: Operating Instructions

    Product may not be exactly as shown IMPORTANT Certified as a component Read and save these instructions part for Viessmann boilers for future reference. Please file in Service Binder 5547 199 - 02 04/2015...

  • Page 2: Safety, Installation And Warranty Requirements

    Follow the manufacturing facilities. Viessmann maintenance schedule of the boiler contained in this manual. Contaminated combustion air will damage the boiler and may lead to substantial property damage, severe Operating and Service Documentation personal injury and/or loss of life.

  • Page 3: Table Of Contents

    Scanning Service Messages........15 Scanning Fault Messages...........15 Emissions Test Mode..........16 Troubleshooting “OFF” is Displayed at the Vitotronic 200.....17 “ ” is Displayed at the Vitotronic 200......17 “ “ is Displayed at the Vitotronic 200......17 “E“ is Displayed at the Vitotronic 200.......17 Maintenance............18...

  • Page 4: About These Instructions

    Regular inspection and service by a qualified heating - Operating Instructions Vitotronic 300-K MW2C contractor is important to the performance of the Viessmann Vitodens 200-W and Vitocrossal 300 CU3A. Neglected maintenance impacts on warranty; regular inspection ensures clean, environmentally friendly and efficient operation.
  • Page 5 Flue products contain poisonous carbon monoxide gas which can cause nausea or asphyxiation Note: Viessmann does not test any detectors and makes resulting in severe personal injury or loss of life. no representation regarding any brand or type of detector.
  • Page 6 Safety Vitotronic 200 Operating For your Safety (continued) Frozen water pipe hazard Installation area conditions WARNING WARNING Failure to protect against frozen pipes could result in Incorrect ambient conditions can lead to damage to burst water pipes, serious property damage and/or the heating system and put safe operation at risk.

  • Page 7: Where To Find The Controls

    Vitotronic 200, type HO1B How to Use the Controls, Vitotronic 200 Symbols In multi boiler systems, each Vitotronic 200 indicates These symbols are not always displayed, but appear the boiler number on the standard display. The following subject to the system version and the operating state.

  • Page 8: Controls Overview

    B ON indicator (green) C Reset button D ON/OFF switch E Pressure gauge (pressure display) F Vitotronic 200, type HO1B user interface Vitocrossal 300 CU3A controls with panel covers open Legend A Vitotronic 200, type HO1B user interface B Vitotronic 200, type KW6B...

  • Page 9: Start-Up/Standby/Shutdown

    The system pressure is too low if the indicator is below 14 psi. In this case, top up with water or At the relevant Vitotronic 200, press the following keys: notify your local heating contractor. for settings; “...

  • Page 10: Setting The Display Contrast

    Further Adjustments Vitotronic 200 Operating Setting the Display Contrast Extended menu: 2. “Settings” 3. “Contrast” 4. Set the required contrast. Setting the Display Brightness If you would like the texts in the menu to be more clearly legible, change the brightness for “Control”.

  • Page 11: Setting The Time And Date

    Further Adjustments Vitotronic 200 Operating Setting the Time and Date The time and date are factory-set. If your heating system has been shut down for a long time, it may be necessary to set the time and date. Extended menu: 2.

  • Page 12: Calling Up The Service Level

    Further Adjustments Vitotronic 200 Operating Calling up the Service Level Note: Do not adjust menu item “Multi-boiler system”. Press OK and simultaneously for approximately 4 The menu item turns a constant temperature seconds. control unit into a weather-compensated control unit.

  • Page 13: Diagnostics

    Scanning Options Vitotronic 200 Operating Diagnosis Brief scan In the brief scan, you can call up temperatures, software versions and connected components, for example. 1. Press OK and simultaneously for approximately 4 seconds. 2. “Diagnosis” 3. “Brief scan”. Press OK. The display shows 9 lines with 6 fields each.

  • Page 14: Checking Outputs (Relay Test)

    Scanning Options Vitotronic 200 Operating Checking Outputs (Relay Test) 1. Press OK and simultaneously for approximately 4 seconds. 2. “Actuator test” The following relay outputs can be controlled subject to system design: Display Explanation All actuators All actuators are off.

  • Page 15: Scanning Service Messages

    If your heating system is due for a service, the symbol After a certain number of burner hours run, e.g. 05500 h “ “ flashes on the Vitotronic 200 display, and the following displays are shown. Your heating contractor can schedule maintenance work...

  • Page 16: Emissions Test Mode

    “test mode”. inspection. to select “ON” Test mode must be activated at the Vitotronic 200 OK to confirm. of the boiler to be tested and also, for heat transfer, at 5. ‘...

  • Page 17: Off" Is Displayed At The Vitotronic 200

    The heating program is enabled or the boiler is shut Set the heating program down externally. If necessary, notify your heating contractor. “ ” is Displayed at the Vitotronic 200 Cause Remedy The time for a service, as specified by your heating Proceed as described on page 16.

  • Page 18: Maintenance

    Energy Savings Order. them with special connecting cables. Replace only with Regular maintenance ensures trouble free, energy Viessmann cables. Contact your local heating contractor. efficient, environmentally responsible and safe heating. Your heating system must be serviced by an authorized contractor at least every 2 years.
  • Page 19 Vitotronic 200 Operating...
  • Page 20 Vitotronic 200 Operating...

Table of Contents