E91 Smart Grid Set Value Increase For Dhw Heating - Viessmann VITOTRONIC 200 Service Instructions Manual

Parameter group Smart Grid

7E91 Smart Grid set value increase for DHW heating

If the function for increasing set temperatures is active
via Smart Grid, "Set DHW temperature 6000" is
raised by this value.
7E92 Smart Grid set value increase for htg wtr buff
If the function for increasing set temperatures is active
via Smart Grid, the current set temperature for the buf-
fer cylinder is raised by this value. The current set tem-
perature depends on the active operating status of the
buffer cylinder in "Time prog buffer cyl".
7E93 Smart Grid set value increase for centr htg
If the function for increasing set temperatures is active
via Smart Grid, the current set room temperature is
raised by this value. The current set room temperature
depends on the active operating status in the "Time
program heating" or "Time proghtg/cooling".
7E95 Smart Grid set value decrease for room t cool
If the function for increasing set temperatures is active
via Smart Grid, the current set room temperature is
reduced by this value. The current set room tempera-
ture depends on the active operating status in the
"Time proghtg/cooling".
272
≙
Setting 1 0.1 K
≙
Setting 1 0.1 K
Requirements: Central heating is switched on.
≙
Setting 1 0.1 K
Requirements: Central cooling is switched on.
≙
Setting 1 0.1 K