Scanning Options; Calling Up Actual Values - Viessmann VITOSOLIC 200 Operating Instructions For The System User

Calling up actual values

Press the following keys:
1. for the "Main menu".
2. OK the first 3 actual values will be
displayed.
"Actual values:"
"Tcol"
"Tcol2"
"Tcylb"
"Tcyl2b" to
"Tcyl4b"
"Tby"
"T-HE"
"Cyl. add."
"Time"
"Date"
"Relay"
"Sensors"
"Intens."
A diagram in the standard display ena-
bles you to check the collector and actual
cylinder temperatures over the course of
the day. If your heating contractor has
enabled the heat meter, a diagram is
also displayed showing the heat amount
for the past 7 days.
Explanation
Collector temperature in °C
Collector temperature in an additional collector array in °C
Actual cylinder temperature in °C
Actual cylinder temperature for additional consumers (e.g.
2nd DHW cylinder) in °C
Bypass temperature in °C
Temperature in an external heat exchanger in °C
Additional function for DHW heating
Condition of relays
Temperature at the respective sensor in °C
Note
If the sensor inputs are not connected, the breaking value (in-
dicating a lead break) is displayed.
Radiation intensity in conjunction with a solar cell
Note
If the input is not connected, the breaking value (indicating a
lead break) is displayed.
3. / for the following actual values,
subject to system equipment
level.
4. until the "Main menu"
appears.
Repeatedly press , this brings up the
following diagrams:

Scanning options

7