Table of Contents
Advertisement
[dig4-protokollauswahl-101201, 1, en_US]
Figure 3-22
Mapping File
For Profibus DP, Modbus, DNP3.0 and VDEW Redundant, a matching bus mapping has to be selected.
For the selection of the mapping file please open the SIPROTEC device in DIGSI and choose Settings > Inter-
faces (see
Figure
The dialog Interface Settings shows under Additional protocols at device the following:
•
Display of the selected communication module
•
Selection Mapping file, listing all Profibus DP, Modbus, DNP3.0 and VDEW Redundant mapping files
available for the respective device type, with their names and reference to the corresponding bus
mapping document
•
Edit field Module-specific settings for changing the bus-specific parameters
[auswahl-mapping-071122, 1, en_US]
Figure 3-23
SIPROTEC 4, 7SD80, Manual
E50417-G1100-C474-A2, Edition 02.2018
DIGSI 4.3: Profibus DP protocol selection (example)
3-23).
DIGSI 4.3: Selection of a mapping file and setting of bus-specific parameters
Mounting and Commissioning
3.3 Commissioning
231
Advertisement
Table of Contents
