Main Back Access-Vdsc530T - Viking VDSC548T Series Service Manual
Electronic control dual fuel range
Hide thumbs
Also See for VDSC548T Series:
- Specification sheet (8 pages) ,
- Manual (48 pages) ,
- Use & care manual (36 pages)
Table of Contents
Advertisement
Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Main Back Access–VDSC530T
To access the main back:
1.
Remove 5/16" screws securing back guard.
Lift back guard up and out.
Back Guard
5/16" Screws
2.
Remove 5/16" screws securing side cover and
main back cover.
Main Back Panel
Cover Plate
© 2011 Viking Preferred Service
Side Cover Panel
5/16" Screws
WARNING
3.
Remove covers and repair/replace as
necessary.
4.
Reverse procedure to reinstall.
114
Advertisement
Table of Contents
