Self-Clean; Normal Operation - Viking VDSC548T Series Service Manual

Operation
Settings and Functions–30" Oven
Set Oven Temperature (cont.):
3. Display will intermittently display both
set OVEN FUNCTION with set OVEN
TEMPERATURE and PREHEAT and actual
temperature until set temperature is reached at
which point the set OVEN FUNCTION and set
OVEN TEMPERATURE are locked in.
Oven will not be activated until both OVEN
FUNCTION and OVEN TEMPERATURE are set.
Oven temperature can be changed at any time by
pressing "OVEN TEMPERATURE" and repeating
Steps 1 and 2 . Oven can be deactivated at any time
by pressing "OFF".
Note: OVEN TEMPERATURE button does not
need to be pushed as the program automatically
moves to setting OVEN TEMPERATURE after
OVEN FUNCTION is selected.
Note: If an oven function is not selected, control
exits to comply with two-step "ON" requirement.
Note: If no selection has been made in OVEN
TEMPERATURE, oven auto-starts at default
temperature.
Note: While preheating, display will alternate
between PREHEAT and FUNCTION and
TEMPERATURE selected.
Note: PREHEAT is the only cycle where actual
temperature is displayed, otherwise the display
shows set temperature.
Note: Certain functions include a PREHEAT cycle.
Once set temperature has been reached, the oven
will automatically exit PREHEAT and follow normal
operation mode.
© 2011 Viking Preferred Service

Self-Clean

If Self-Clean is selected:
1. The control initiates the door lock. During this
period, the display shows LOCKING.
2. Once the door is locked, the control displays
SELF CLEAN and the time remaining on the
display.
3. The control continues in Self-Clean mode for
the required self-clean duration.
4. Once the Self-Clean cycle is complete, the
control displays COOL DOWN. The door
remains locked.
5. When 500ºF is reached, the control unlocks the
door and COOL DOWN is no longer displayed.
Note: The cooling fan will operate throughout the
complete 3.5 hour self-clean cycle, as well as the
cool down stage until the cavity temperature drops
below 250˚F temp.

Normal Operation

Once the FUNCTION and TEMPERATURE are set,
and PREHEAT completes, oven will beep indicating
set temperature has been reached and normal
operation begins.
1. The display shows set temperature.
2. Oven temperature can be adjusted at any
time by pressing "OVEN TEMPERATURE",
then rotating "SELECTOR KNOB". Push in
"SELECTOR KNOB" to accept or auto-accept
after five seconds. If user wants to return to
previous setting, press the "CLEAR/SETTINGS"
button (as long as the SELECTOR KNOB has
not been pushed in).
3. If oven is no longer at correct temperature due to
opening oven door, control will revert to PREHEAT.
23