Meat Probe; Set Oven Function; Function Displays (General) - Viking VDSC548T Series Service Manual

Electronic control dual fuel range
Hide thumbs Also See for VDSC548T Series:
Table of Contents

Advertisement

General Information
General Information
Settings and Functions–30" Oven

Meat Probe

Refer to the Use
and Care manual
for proper use and
placement of the
temperature probe for
required results.
1. With the probe inserted in the oven cavity
socket, Press "CLOCK/
PROBE" button to
activate. Right display
will read Meat Probe
Set Point. PROBE will
illuminate under left
display.
2. Toggle "SELECTOR KNOB" right to increase or
left to decrease to desired temperature in 1ºF
increments.
3. Push in "SELECTOR KNOB" to accept time or
after five seconds, probe time will auto-accept.
4. Set OVEN FUNCTION and TEMPERATURE
as detailed in "Set Oven Function and
Temperature" on pages 21-23.
Meat probe will display actual internal meat
temperature as it cooks. When programmed
Probe Temperature is achieved, there will be three
long beeps and right display alternates between
FUNCTION/Set Point and DONE/Meat Set Point.
On left display, PROBE icon flashes. Oven will
automatically turn off. The control emits a short
reminder beep every 60 seconds until the "OFF" or
"CLEAR/SETTINGS" button is pressed.
Note: DELAY COOK cannot be performed in
conjunction with a COOK BY PROBE operation as
DELAY COOK has no start time programmed in.
Note: TIMED COOK can be performed along with
a MEAT PROBE, but only when Meat Probe is used
for monitoring only.
© 2011 Viking Preferred Service
CLOCK/
OVEN
PROBE
FUNC
MIN/SEC
OVEN
TEMP
TIMER
COOK
OFF
TIME
STOP
CLEAR/
TIME
SETTINGS
Clock Display
SET
HR
MIN
02:00
AM
PM
STOP TIMER NO
PROBE
COOK TIME ON DELAY

Set Oven Function:

1. Press "OVEN
FUNCTION"
button. (BAKE is
set as default and
flashes.)
2. Toggle "SELECTOR KNOB" left or right to
desired oven function.
3. When desired oven function is flashing, push in
"SELECTOR KNOB" to accept and advance to
temperature settings. Exit with "OFF" button or
auto exit after five seconds with no SELECTOR
KNOB push.

Function Displays (General)

The functions look as follows:
BAKE
CONVECTION BAKE
TRUE CONVECTION
CONVECTION ROAST
CONVECTION BROIL
HI (fixed 550°F)
CONVECTION BROIL
MED (fixed 450°F)
CONVECTION BROIL
LO (fixed 350°F)
BROIL HIGH
(fixed 550°F)
CLOCK/
OVEN
PROBE
FUNC
MIN/SEC
OVEN
TIMER
TEMP
COOK
OFF
TIME
STOP
CLEAR/
TIME
SETTINGS
21
21

Advertisement

Table of Contents
loading

Table of Contents