Cycles (Cook Count/Clean Count) - Viking VDSC548T Series Service Manual

Service Diagnostics and Procedures
Diagnostics and Testing
Cyles (Cook Count/Clean Count)
1. This test will display how many cooking cycles and clean cycles have been performed during the life of
the range. All cooking functions (bake, convection bake, broil, etc) are combined in the Cook Count.
Enter the Diagnostic mode (see Check Control Version and Entering Diagnostic Mode, page 45), toggle
the "SELECTOR KNOB"to the right to display ECO1 or ECO2.
MIN/SEC
COOK
2. Press the "SELECTOR KNOB" and the display will show ECO1 VER 25 or ECO2 VER 25.
MIN/SEC
3. Toggle the "SELECTOR KNOB" to the right to display until the word CYCLES is shown in the display.
MIN/SEC
4. With the word CYCLES in the display, push in on the selector knob.
MIN/SEC
© 2011 Viking Preferred Service
CLOCK/
PROBE
TIMER
TIME
STOP
TIME SETTINGS
CLOCK/
PROBE
TIMER
COOK
TIME
STOP
TIME
CLOCK/
PROBE
TIMER
COOK
TIME
STOP
TIME
CLOCK/
PROBE
TIMER
COOK
TIME
STOP
TIME
OVEN
FUNC
ECO1
OVEN
TEMP
OFF
CLEAR/
OVEN
FUNC
ECO1 VER
OVEN
TEMP
25
OFF
CLEAR/
SETTINGS
OVEN
FUNC
CYCLES
OVEN
TEMP
OFF
CLEAR/
SETTINGS
OVEN
FUNC
CYCLES
OVEN
TEMP
OFF
CLEAR/
SETTINGS
64