3M Versaflo TR-800 Series User Instructions page 10

Fig. 4-1
Fig. 4-3
Fig. 5-1
3. Removal of the filter/cartridge and cover (in non-hazardous locations only):
• Turn the unit off. Do not remove the filter/cartridge with the motor/blower running.
• Hold the unit downwards so the back (belt side) faces you and the filter and cover face down on a flat surface (Fig. 6)
to help minimize the potential for contamination of the motor/blower inlet.
• Press the yellow filter latch on the left side (Fig. 6). The latch requires two fingers to engage. Pull the filter/cartridge
out and away from the motor/blower.
• Remove the filter/cartridge cover. Hold the filter/cartridge upside down. Pull out on the blue tab at the bottom of the
filter cover to unlatch it from the filter/cartridge. Pull the cover down and away from the filter/cartridge.
Fig. 4 – Installing filter cover, spark arrestor, and prefilter
Fig. 5 – Latching the filter/cartridge
Fig. 6 – Filter/Cartridge removal
Fig. 4-2
Fig. 4-4
Fig. 5-2
7