Parameter/
button
Details
Regions
Decoder
Quality values
The "Quality values" group is shown as soon as a program is started.
The current values of the quality features are displayed in the form of a bar according to the
selected verification standard. To obtain the details of the quality features, move the mouse
over the quality abbreviation (for example, SC) and a tooltip with more information will open.
Table 5- 64
Color
Green
Yellow
Red
Black
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
Description
You can use the Details operator controls to define which information and results are shown in the
image display and which are hidden.
Enabling/disabling the ROI view
Clicking the buttons enables or disables the different views. We distinguish between search ROIs
that limit the search range and result ROIs.
By clicking the dots next to the buttons, you can select the display options.
The following result details are available, depending on the selected task and the active settings:
Search ROIs:
Search ROI (fixed default)
•
Name of search ROI
•
Result ROIs:
Name of result ROI
•
Result text
•
Restriction: The reader is in the "Start" (RUN) status.
Filter selection
The following filters are available depending on the selected task and the active settings:
Filter image:
Filtering
•
Features:
Grid
•
Cells
•
Note that these features can only be selected or deselected if formation of result has already
been performed and the value "ISO/IEC 29158" has been selected under "Decoder > General >
Uncalibrated quality".
Quality values
Length
Long
Medium
Short
--
Meaning
Quality grade is "Good"
Quality grade is "Fair"
Quality grade is "Poor"
The value is only for information and is not used to decide the
overall quality
Application
5.1 Program
99