Siemens SIMATIC MV500 Operating Manual page 49

AI Data Content
8006 Identification of the Components of a Trade Item
8007 International Bank Account Number (IBAN)
8008 Date and Time of Production
8018 Global Service Relation Number (GSRN)
8020 Payment Slip Reference Number
8100 GS1-128 Coupon Extended Code
8101 GS1-128 Coupon Extended Code
8102 GS1-128 Coupon Extended Code
90 Information Mutually Agreed Between Trading Partners
91 to 99 Company Internal Information
Note
Explanation of the GS1 application identifier list
• (*) The 1st number defines the length (number of digits) of the application identifier. The
following digits relate to the format of the data content.
• (**) If only year and month are available, "DD" must contain two zeros.
• (***) The 4th digit of this "GS1 application identifier" defines the position of an implicit
decimal point. The decimal point is inserted at this position during output (refer to the
following example).
Example:
Read code =
Filter ID = GTIN: \\01 Length: \\323
The output is: GTIN: 12345678901234; Length: 0125.55
"Format text" and "Multicode format text" parameters
Table 5- 27 "Format text" and "Multicode format text" parameters
Parameter
Format text
Multicode
format text
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
]d2
01123456789012343232012555
Possible values Default
see "Format text" %s
input box
like "Format text" %s
input box
Description
With this input box, you can specify the content and the format
of the string to be output.
You specify how the overall result of a read of multiple codes
is formatted.
The formatting instruction "%s" (filtered result string) refers to
the already formatted individual results in this case.
Note
The multicode format text is used only when the "Number of
codes" check box in the "Multicode" group is selected.
Application
5.1 Program
Format*
n4+n14+n2+n2
n4+X..30
n4+n8+n..4
n4+n18
n4+X..25
n4+n6
n4+n1+n5+n4
n4+n1+n1
n2+X..30
n2+X..30
49