Siemens SIMATIC MV500 Operating Manual page 95

verification of more than one code in one step does not, however, correspond to the
stipulations of the standard.
Filmstrip
The images saved last are shown below the currently displayed image.
Setting the capture area (ROI) and moving the image section
You can change the size of the ROIs displayed in the image using the mouse (left mouse
button) and position them using drag-and-drop. You can use the right mouse button to move
the zoomed image section.
You can also set and change the snap range with the keyboard:
● Shift:
– Using the arrow keys: larger increments (10 pixels)
– Ctrl + arrow keys: Shift pixel by pixel
● Pressing the shift key at the same time activates ROI size change with the arrow keys:
– Shift + arrow keys: Changes the size in larger increments.
– Shift + Ctrl + arrow keys: Changes the size pixel by pixel.
Result
The results of the last sample processing procedures/read attempts are shown in this group.
Note
Representation of non-printable characters
Non-printable characters are displayed in the format "\xx". "xx" corresponds to the ASCII
value.
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
Application
5.1 Program
95