Siemens SIMATIC MV500 Operating Manual page 141

System image
In this group, you can save a complete system image in a diagnostics package.
Note that saving a complete system image may take a few minutes. The WBM informs you
about the progress of the save process. To ensure smooth operation, the reader must not be
operated during this time.
Save diagnostics package
Requirements: The "Advanced access" parameter ("Settings > Security") is enabled.
This button is used to save a complete system image in a diagnostics package. In addition to
diagnostics data, this diagnostics package also contains the device parameter assignment
and can be used by Support for error analysis.
Note
Do not operate reader during saving
Saving the diagnostics package can take several minutes. To ensure that the diagnostics
package is saved error-free, do not operate the reader during saving.
• Wait until the save operation of the diagnostics package has been fully completed.
• If saving is terminated with the corresponding browser function, this has no influence on
the reader transfer operation: You must wait until the reader has fully transferred the
diagnostics package.
Persistent data records
In this group, you can display all diagnostics entries saved permanently on the reader and
save them.
Table 7- 3
Parameter / Action
Open & Save
Save as CSV
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
Persistent data records
Description
Clicking the "Open & Save" button opens a website with all the diag-
nostics entries saved permanently on the reader. You can save this
website on your PC.
If you click the "Save as CSV" button, a dialog opens in which you can
save the diagnostics entries saved permanently on the reader as a
CSV file.
Device
7.1 Diagnostics
141