Settings
6.2 Options
Table 6- 16
Internal lamp / External lamp
Parameter
Possible values
Supply via PoE or
☐ / ☑
CM
Lamp
Auto (<article num-
•
ber>)
Other
•
None
•
None
•
Other
•
<Article number>
•
external lamp
Product name
--
Flash
Enabled
•
Disabled
•
Permanent light
Enabled
•
Disabled
•
Polarized
Enabled
•
Disabled
•
Main beam
Enabled
•
Disabled
•
Unpolarized
Enabled
•
Disabled
•
120
Default
Description
☐
Enable this parameter if you operate the reader
via PoE or a CM.
Note that the power consumption must be re-
duced for power supply via PoE or CM.
The lighting settings are restricted as a result.
Enabling this parameter limits the number of
segments that can be switched on when using the
ring light types "Multi" or "Remote".
Auto (<article num-
Choose the lamp with which you want to work.
ber>)
Note
•
•
None
•
--
In this input box, you can assign a name to the
lamp.
Possible values: Letters, numbers and ASCII
special characters. Maximum of 255 characters.
--
The displayed parameters depend on the selected
1)
lamp and the parameter "Supply via PoE or CM".
•
--
1)
•
--
1)
--
1)
--
1)
Select "Other" to describe and select a lamp
not included in the list.
Select "None" if you do not want to use an
internal or external lamp.
Select "Auto" to detect the internal lamp auto-
matically when the reader starts up. This set-
ting ensures that subsequent parameters are
read and specified automatically.
If the value "Auto" was selected in the "Lamp"
parameter, these parameters show the func-
tions of the selected lamp.
If the value "Other" was selected in the "Lamp"
parameter, you must use these parameters to
inform the reader which function the selected
lamp supports.
Operating Manual, 05/2019, C79000-G8976-C495-02
SIMATIC MV500