Device; Diagnostics - Siemens SIMATIC MV500 Operating Manual

Device

7.1

Diagnostics

In the "Diagnostics" menu, you can display, delete and save diagnostic images and
diagnostic reports.
Images
In this group, you receive diagnostics information on the stored images.
Color-coded identification of the background
● Images that belong to the same sequence:
The background of the "Sequence ID"/"Image ID" box is always shown in the same color.
● When the read result is output, the background of the corresponding image is color-coded
in the entire row.
The following information is displayed:
● A sequence ID and an image ID. In individual trigger mode, the sequence ID is
incremented with each start in processing mode, otherwise at each external trigger. The
image ID is incremented for each image and reset at the start of a new sequence.
● Image acquisition time and date
● Shutter Speed and Brightness
● The attributes set for the image
● The program sequence and the program with which the processing was performed.
● The image
Table 7- 1
Parameter / Action
Number
Open
Save
Reset
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
Images
Description
You can see the number of images currently in the image buffer with-
out a persistently stored image.
Clicking the "Open" button opens a website with all images of the
image buffer (including the one persistently stored image if you have
enabled the "with persistent" check box). Clicking on an image enlarg-
es it.
If you click the "Save" button, a window opens in which you can speci-
fy the format of the images of the image buffer to be saved on your
computer. If you have enabled the "with persistent" check box, the one
image stored persistently on the reader will be stored on your comput-
er.
Clicking the "Reset" button deletes all images in the image buffer. A
persistently stored image is retained.
7
139