Transferring And Verifying Programs - Omron RX2 Series User Manual

4 DriveProgramming Editor
4-9

Transferring and Verifying Programs

Program transfer and verification are possible between the inverter and the DriveProgramming function
of the CX-Drive. At the same time, you can also execute parameter transfer and verification.
Transfer (from PC to Inverter)
The created programs are compiled (program-checked) and transferred (downloaded) to the inverter if
there is no error.
From the [Drive] Menu, select [Transfer]- [To Drive] to transfer (download) data.
Transfer (from Inverter to PC)
The programs and parameters in the inverter are transferred (uploaded) to the DriveProgramming.
From the [Drive] Menu, select [Transfer]- [From Drive] to transfer (upload) data.
Verification (between PC and Inverter)
The DriveProgramming programs and parameters are compared with the data in the inverter.
From the [Drive] Menu, select [Transfer] - [Compare with Drive] to execute verification.
Partial Transfer (from PC to Inverter)
From the [Drive] Menu, select [Transfer] - [Selection To Drive] to transfer (download) the selected data.
Partial Transfer (from Inverter to PC)
From the [Drive] Menu, select [Transfer] - [Selection From Drive] to transfer (upload) the selected data.
4 - 24
DriveProgramming User's Manual (I622-E1)