Roland R1000 Series Manual page 76

Start-up
Program parameter 5: Setting the lower limit value.
Program Parameter: 5
lower threshold
80%
Fig. 41: Adjusting the lower limit
Value range: between 1% and 100% of the nominal value, with simultaneously displaying the
absolute limit value.
Program parameter 6: Setting the upper limit value.
Program Parameter: 6
upper threshold
120%
Fig. 42: Adjusting the upper limit
Value range: between 100% and 180% of the nominal value, with simultaneously displaying the
absolute limit value.
Program parameter 7: Adjusting the time for average value.
Program Parameter: 7
average value
25ms
Fig. 43: Adjusting the time for average value
Possible choices are:
• 8 / 15 / 25 / 50 / 100 / 250 ms
Generally, the „desired value" should be set to fit to the transportation speed and to the sheet
length.
76
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
0.720 mm
1.080 mm
Note
Fast transportation and short sheets require a smaller averaging
time, see chapter 8.3.
Manual
B0063191 / 1.3