Configuration Of Connectors - Roland R1000 Series Manual

Electrical installation
5.2

Configuration of connectors

5.2.1 Configuration of connectors at L20-XX-S
Fig. 13: Connections at the L20-3-XX-S
5.2.2 Configuration of connectors at L20-3-XX-S
X6
X1
Fig. 14: Connections at the L20-3-XX-S
26
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
XA1
X2
XB1
X3
XC1
X4
Note
When using only one pair of sensors they must be connected to
channel 1.
When using two pairs of sensors they must be connected to channel 1
and 2.
Manual
XA2 XA3
XB2 XB3
X5
XC2
XC3
B0063191 / 1.3
Legend
X1 Connection for supply and
inputs
X2 Socket for outputs
X3 Socket for Fieldbus output
X4 Socket for Fieldbus input
X5 Grounding screw bolt
R Not in use
B Socket for sensor B
A Socket for sensor A
(Sockets A and B are identical and
therefore interchangeable)
The USB terminals are at the front
plate.
1)
the fieldbus connections are
specific to each type of fieldbus,
Legend
X1 Connection for supply and
inputs
X2 Socket for outputs
X3 Socket for Fieldbus output s
X4 Socket for Fieldbus input
X5 Grounding screw bolt
X6 Encoder input (not used)
XA1, XB1 , XC1 Meas. channel 1
XA2, XB2 , XC2 Meas. channel 2
XA3, XB3 , XC3 Meas. channel 3
The USB terminals are at the front
plate.
1)
the fieldbus connections are
specific to each type of fieldbus,
1)
1)
1)
1)