Fault Messages, Causes And Remedies - Roland R1000 Series Manual

B0063191 / 1.3
9

Fault messages, causes and remedies

In case of malfunction a message containing the fault number and the associated fault message is
displayed.
Error code:
power
Fig. 95: Example of a fault message
The fault number indicates the fault and the probable cause. The fault description and the suitable
measures to remedy the fault condition are found in the following tables. The cause of malfunction
must be eliminated before the equipment can continue operation.
The fault can be cleared by pressing the MENU key on the control unit.
The fault messages are summarized into the following classes:
1. Memory
2. Transmission USB (virtual RS232)
3. Operation
4. Keyboard
5. Fieldbus interface
6. Monitoring measuring channel or calibration with calibration sheet
7. Measuring channel calibration
8. Hardware
9. Operating voltage
10. Sensors / sensor cables
11. Other faults
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Control System R1000 series L20
with integrated fieldbus interface
176
Note As long as the cause of the fault is not eliminated, the fault cannot be
cleared.
Manual
Fault messages, causes and remedies
101