System Parameters - Roland Double Sheet Detector R1000 Series Manual

B0069991 / Rev. 1.7
7.9

System parameters

The general adjustments are specified by configuring the system parameters.
For accessing, select the "system parameter configuration" mode and confirm with ENTER.
System parameter 1: Setting the dialogue language.
System Parameter:
language
english
Fig. 75: Selecting the dialogue language
Possible choices:
• English
• German
• Italian
• French
• Spanish
System parameter 2: Determining the type of system.
System Parameter:
system type
standard
Fig. 76: system type
Possible choices:
• Standard
• FE + AL 0,5 - 3 mm
• FE + AL 0,1 - 0,8 mm
• FE + Austenit 0,1 - 1 mm
• FE + Austenit 0,5 - 3 mm
• Frequency
• Damping mode
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector-series I20
The selected system configuration should be documented in the form
Note
"System configuration" in the chapter 13 "Appendix" or in the equipment
documentation. This information is required in case a system needs to be
exchanged.
1
2
The measurement range can be determined in the sensor diagram for the
Note
respective sensor (see chapter 2.3 "Sensors").
For explanation of "System type" see chapter 3.2.
Manual
Start-up
89