Roland Double Sheet Detector R1000 Series Manual page 91

B0069991 / Rev. 1.7
System parameter 9: Switching the password function on / off.
System Parameter:
password active
Fig. 80: Switching the password on / off
Possible choices:
• yes
• no
System parameter 10: Determining a password.
System Parameter: 10
set password I20
0000
Fig. 81: Determining a password
The factory setting of the password is "0000".
System parameter 11: Specifying the number of connected sensors.
System Parameter: 11
pairs of sensors
Fig. 82: Specifying the number of sensors for a 4-channel unit
Possible choices:
• 1 pair of sensors
• 2 pairs of sensors
• 3 pairs of sensors
• 4 pairs of sensors
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector-series I20
9
no
If password protection is not activated, then all parameters can be
Attention
accessed at any time. This is recommended only during starting-up
the system. For daily operation the password function should be
activated.
1
Changing the current configuration will delete all stored program
Attention
parameters. This means that for all types of sheets the nominal
thickness values must be re-entered and the Teach-In must be
performed again.
Manual
Start-up
91