B0069991 / Rev. 1.7
After the USB terminal has been connected to the computer, the following is shown.
FIRMWARE UPDATE
start pressing key
UP and ENTER
Fig. 98: Messages for activating firmware update
Simultaneously pressing the keys arrow
FIRMWARE UPDATE
Bootloader active
Fig. 99: Start firmware update
The update will then be executed via the RPP7 software.
For operating the RPP7 software please refer to chapter 10, "Maintenance".
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector-series I20
By pressing the both keys the program memory is deleted.
Attention
The firmware update must then be performed without disturbance,
in order to keep the system operational.
Manual
and ENTER activates the firmware update.
Start-up
97