Table of Contents
Advertisement
Communication
ConnectUPS--X Web/SNMP Card
ConnectUPS SNMP Card
12.2 LanSafe Power Management Software
Each Powerware 9390 UPS ships with LanSafe Power Management Software. To begin
installing LanSafe software, see the instructions accompanying the Powerware Software
Suite CD.
LanSafe software uses an RS-232 serial link to communicate with the UPS, and it provides
you with up-to-date graphics of UPS power and system data and power flow. It also gives
you a complete record of critical power events, and it notifies you of important UPS or
power information. With custom views for monitoring status and metering information,
various user groups can select the most useful view for their specific needs.
12.3 Remote Notification
For connection and set up of a modem, or to enable Remote Notify and Call Home
features within the UPS, please contact Powerware (see page 1-4).
Remote Notification provides the UPS with the capability to use a standard off-the-shelf
PC modem as a telephone interface. The features provided by this option are as follows:
Call out to a remote terminal or pager based on programmable events and alarms.
Four separate, programmable notification groups (phone numbers).
Automatic answering (user configurable) for access to the Terminal mode of the UPS.
Remote and local ability to clear Call Out alarms and events.
Error detection and correction for misconfigured and disconnected modems.
Remote Notification provides the user with the option of receiving alarms and notices at a
remote location. Using the Terminal mode, the user calls the UPS to perform basic
monitoring. In the event of a UPS alarm or notice, the user is notified at the remote
location. The UPS calls, through the modem, to the user's computer or pager and leaves a
message.
12-2
Modbus Card
Relay Interface Card
Figure 12-1. Optional X-Slot Cards
Powerware
9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev A
®
Multi---Server Card
Modem Card
Single---Port Card
Advertisement
Table of Contents
