Table of Contents
Advertisement
Chapter 7
7.1 UPS Standard Features
The UPS has many standard features that provide cost-effective and consistently reliable
power protection.
7.1.1 Control Panel
The control panel, located on the UPS front door, contains an LCD and pushbutton
switches to control the operation of the UPS, and to display the status of the UPS system.
See Chapter 8, "Using the Control Panel," for additional information.
7.1.2 Customer Interface
7.1.2.1 Building Alarm Monitoring
The facility's alarm system contacts can be connected to two inputs in the UPS. The UPS
uses these inputs to monitor the building alarms in addition to the UPS status. See
Chapter 10, "Using Features and Options," for additional information.
7.1.2.2 Alarm Contact
One alarm contact is provided for connection to equipment at the facility, such as a light,
an audible alarm, or a computer terminal. The equipment connected to these contacts
alert you to a UPS alarm. See Chapter 10, "Using Features and Options," for additional
information.
7.1.3 X-Slot Communication Bay
A two-slot communication bay is standard equipment, with an additional two-slot bay
available as an option. Two to four optional X-Slot cards can be installed in the UPS
module at any time. See Chapter 12, "Communication," for additional information.
7.1.4 Advanced Battery Management
A three-stage charging system increases battery service life by optimizing recharge time,
and protects batteries from damage due to high current charging and inverter ripple
currents. Charging at high currents can overheat and damage batteries.
7.1.5 LanSafe Power Management Software
LanSafe Power Management Software is bundled as part of the Powerware Software Suite
CD shipped with the UPS. See Chapter 12, "Communication," for additional information.
Powerware
9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev A
®
Features, Options, and Accessories
7-1
Advertisement
Table of Contents
